Korg Grandstage X - Steps for Setting the Rhythm

Grandstage X - Setting the rhythm
64
Steps for setting the rhythm
The steps for making rhythm settings basically involve the following operations.
1 Press the SETUP button in the RHYTHM section.
The SETUP button lights up.
The BASIC page for RHYTHM SETUP is shown in the display.
The RHYTHM SETUP page is divided into four pages: BASIC, ZONE, TRACK and CHORD PROGRES-
SION.
Press the respective function buttons that are below the page names in the display to directly
jump to each page.
2 Use the / buttons to select a parameter.
3 Use the value dial or the +/- buttons to edit the settings.
The values and setting details are shown to the right of the parameters.
Changing these values will immediately apply them as system settings and save them to memory,
even after the power is turned off.
→ RHYTHM section parameters
4 After you are finished with the settings, press the SETUP button or the EXIT button.
The SETUP button will go dark.