Grandstage X
-
Connecting and getting ready to play
23
Turning the power on/off
|
Turning the power on
1 Lower the volume of your powered monitor speakers, stereo amp or other external output
devices that are connected, and then turn off their power.
2 Move the VOLUME slider on the left side of the front panel all the way down to minimize the
volume.
3 Press the (power button) on the right side of the front panel.
Once the name of the sound (program) appears in the display, you’re ready to play.
4 Turn on the power of the external equipment that’s connected to the Grandstage X’s AUDIO
OUTPUT jacks, such as a mixer or powered monitor speakers.
5 Adjust the VOLUME slider on this instrument and the volume on your external equipment to a
suitable level.
The VOLUME slider adjusts the volume of sound from the AUDIO OUTPUT jacks and headphones
jack.
|
Turning the power off
1 Lower the volume of your powered monitor speakers, mixer or other external output device, and
then turn them off.
2 Long-press the (power button) on the Grandstage X. Once the message “Shutting down...”
appears in the display, take your finger off the button.
Once the display and all buttons go dark, the power automatically turns off.
Auto power-off function
When a set period of time has passed without playing the keys or using the buttons, knobs or sliders
(aside from the VOLUME slider) on this instrument, the power automatically turns off. To change the
set period of time or disable this function, refer to “Auto power off” in the Owner’s Manual.
→ Auto power off
Do not unplug the power cord before all of the buttons go dark. Doing so may cause a malfunc-
tion.
To Next Page
Loading...
