Korg Grandstage X - How to Make Settings

Grandstage X - Audio In settings
55
How to make settings
The steps for making Audio In settings (described below) basically involve the following operations.
1 Press the AUDIO IN and SYSTEM buttons at the same time.
The Audio In-related parameters are shown in the display.
2 Use the / buttons to select a parameter.
3 Use the value dial or the +/- buttons to edit the value.
The values and setting details are shown to the right of the parameters.
Once you edit a value, the change is immediately applied to the Audio In settings, and your
changes are retained even after the power is turned off.
→ Audio In parameters
4 If you’re using an insert effect (IFX), select “IFX Setup” and press the ENTER button.
5 After you are finished with the settings, press the AUDIO IN button or the SYSTEM button.