Grandstage X
-
Selecting and playing sounds
36
and HIGH (from left to right).
Note:
You can save these settings as favorites.
→ Save options for the EQUALIZER section parameters (EQ)
|
Adding presence with ANALOG TONE
The ANALOG TONE feature on this instrument gives you an analog sound that’s characteristic of the
vacuum tube used on the Nutube.
1 Press the ON/OFF button in the ANALOG TONE section (the button lights up).
2 Turn the knob to adjust the tone as you like.
Turning the knob clockwise increases the natural distortion, harmonics and compression effect
that’s characteristic of a vacuum tube, adding more presence to the sound so that it doesn’t get
lost in the mix.
Note:
You can save the analog tone settings as favorites.
→ Save options for the ANALOG TONE section parameters (Analog Tone)
About Nutube
Nutube is a new vacuum tube developed by KORG INC. and Noritake Itron Corporation that utilizes
technology from vacuum fluorescent displays. As with conventional vacuum tubes, the Nutube is con-
structed with an anode, grid and filament, and operates as a complete triode tube. Furthermore, it
generates the response and same rich harmonics characteristic of conventional vacuum tubes.
Slider Explanation Adjustable range
LOW Low-end shelving
type
-12–0–+12 dB
MID Midrange band type -12–0–+12 dB
HIGH High-end shelving
type
-12–0–+12 dB
Boosting the equalizer too much might make the audio too loud and distorted. If this happens,
try lowering the volume of each part.
If this instrument is subjected to strong impact, you may hear noise in the high-frequency
range from your speakers, headphones and other outputs. This is due to the structure of the
Nutube, and is not a malfunction.
To Next Page
Loading...
