Korg Grandstage X - Steps for Making System Settings

Grandstage X - System settings
72
Steps for making system settings
The steps for making system settings basically involve the following operations.
1 Press the SYSTEM button.
The SYSTEM button lights up.
The system parameters are shown in the display.
2 Use the / buttons to select a parameter.
3 Use the value dial or the +/- buttons to edit the value.
The values and setting details are shown to the right of the parameters.
Changing these values will immediately apply them as system settings and save them to memory,
even after the power is turned off.
4 After you are finished with the settings, press the SYSTEM button or the EXIT button.
The SYSTEM button will go dark.