Korg Grandstage X - Editing a Program; How to Edit

Grandstage X - Creating favorites
48
Editing a program
You can make basic adjustments to the sound and effects of the programs you select. Edited pro-
grams can be saved as a favorite.
| How to edit
1 Select the program to edit.
2 Press the function button that’s below EDIT in the display.
The parameter is shown in the display.
COMMON: Edits the settings that apply to the favorites overall.
→ Adjusting the sound
→ Adjusting the key touch and sound
PART: Edits the program settings for the currently selected part.
→ Program parameters
REVERB: Edits the parameters of the REVERB section.
→ Reverb/delay settings
The parameters that are more difficult to operate using just the panel, such as the Time setting
for Reverb/Delay are shown, letting you adjust multiple parameters for the right balance.
Note: This is not used for editing the part programs.
EQ: Edits the parameters of the EQ section.
→ Using the equalizer
Tip: You can use these to adjust the Mid Freq, which can’t be done from the panel.
Note: This is not used for editing the part programs.
3 Use the / buttons to select a parameter.
4 Use the value dial or the +/- buttons to edit the value.
5 Repeat steps 3 and 4 to continue editing.