Grandstage X
-
Panel description and functions
9
Front panel
1 Pitch bend wheel
This is mainly used to control the pitch of notes played. Move the wheel up to raise the pitch, and
move the wheel down to lower the pitch.
→ Pitch bend wheel
2 Modulation wheel
This is mainly used to control the vibrato effect. Moving the wheel up applies the effect that’s set for
the respective sound.
→ Modulation wheel
3 SW1 button, SW2 button
These buttons control the sound. SW1 controls the tone, and SW2 mainly controls whether the effect
is on/off. The functions that can be controlled are effectively set for each sound. Refer to the program
list in the “Sound Name List” for the functions that are set.
4 VOLUME slider
This adjusts the volume of audio output from the headphones and AUDIO OUTPUT jacks.
5 UNISON (Unison section)
Applies a unison effect to the sound. This feature stacks and plays the same note together multiple
times, creating a thick and spacious sound. This is set to be applied to the MAIN part only by default.
UNISON button: This turns the unison effect on/off.
UNISON slider: Adjusts how the unison effect is applied.
→ Using unison to create thick, spacious sounds
6 RHYTHM (Rhythm section)
The Grandstage X features an authentic rhythm function with drums and bass. This lets you enjoy a
virtual session with drums and bass, which follow the chord progression you play or program in
advance.
CHORD PROGRESSION button: Turns the chord progression function on/off.
To Next Page
Loading...
