Grandstage X
-
Selecting and playing sounds
25
Selecting sounds
|
Selecting the main sound program
1 Press a button in the PART CONTROL section.
Only the MAIN part plays by itself (SOLO).
2 Use the slider to adjust the volume to the optimal level.
3 Press the 1 [GRAND] button in the SOUND SELECT section.
This selects the sound programs in the GRAND category.
4 Use the value dial or the +/- buttons to the right of the display to select a program.
Selecting a program from the program list
1 Press the button marked “LIST” at the bottom left of the display.
This shows a list of all programs available for the selected category.
2 Use the value dial or buttons to select the programs you like.
Right side of display: Value dial, +/- buttons
Left side of display: button, button
Tip:
The program list offers some useful features for selecting sounds.
To Next Page
Loading...
