Grandstage X
-
Creating favorites
43
Favorites function
You can save the MAIN, LAYER and SPLIT settings as well as the front panel settings and other vari-
ous settings in the display as a “favorite”, which you can recall instantly. There are 10 banks of 10
favorites for a total of 100 favorites that you can save.
Favorites include the MAIN, SPLIT and LAYER programs, levels and edit information. Favorite can also
include settings for unison, reverb/delay, transpose, split point and so on.
You can select from the 100 favorites by activating the Favorites function (press the FAVORITE but-
ton), pressing the SOUND SELECT 1–10 buttons to select a slot, and pressing one of the bank 1–10 but-
tons while holding down the FAVORITE button to select a bank. (See “Favorite List” in “Sound Name
List”.)
To create a new favorite, you must modify the programs (single sounds) originally saved, or modify a
program with layer/split sounds that uses up to three programs.
Tip:
Some of the favorites include recommended settings by factory default.
Tip:
You can back up favorite data using a commercially available SD card and replace the existing data as neces-
sary.
→ FILE
To Next Page
Loading...
