Korg Grandstage X - Selecting Sound Programs for Layers and Splits

Grandstage X - Selecting and playing sounds
27
| Selecting sound programs for layers and splits
Selecting sounds for layers
When you layer the programs, the programs for the MAIN and LAYER parts play together when you
play the keyboard.
1 Select the program to use for the MAIN part.
→ Selecting the main sound program
2 Press the LAYER button in the PART CONTROL section (the button lights up).
When you play the keyboard, the programs for two parts are stacked.
On the display, the upper row shows the program name for the MAIN part, and the lower row
shows the program name for the LAYER part.
3 Use the MAIN and LAYER sliders to adjust the volume.
4 Press the  or  buttons to the left of the display to select the name of the program used by the
lower LAYER part.
The lower part is automatically selected when you switch LAYER from OFF to ON.
5 Use the buttons, value dial or the +/- buttons in the SOUND SELECT section to select the
programs for the LAYER parts. You can also select the programs from the list.
→ Selecting a program from the program list