Korg Grandstage X - System

Grandstage X - System settings
78
| SYSTEM
Auto power off
When a set period of time has passed without playing the keys, operating the knobs and sliders or
pressing the buttons on this keyboard, the power is automatically turned off. This is called “auto
power off”.
Select a setting of either “Disabled” or “4 Hours”.
The default setting is “4 Hours”, which means that the power will automatically turn off if the
Grandstage X is not used for four hours.
Adjusting the display brightness (Display Brightness)
Sets the display brightness.
Adjusting the illumination of the KORG logo on the rear panel (Rear Illumina-
tion)
This sets the brightness of the rear panel KORG logo.
Setting the system ID (System ID)
When connecting more than one Grandstage X to your computer, set the system ID for each unit to a
different number so that they can be individually recognized.
Configuring the USB network settings (USB Network)
This configures the protocol used when this instrument communicates with your computer, such as
when updating the software.
RNDIS: If you’re using Windows 7 or 8, use this setting.
NCM: If you’re using macOS or Windows 10 or later, use this setting.
The default setting is “NCM”.
Restoring the factory default settings (Factory Reset)
The Grandstage X can be returned to its factory default settings.
Continuing to use the Grandstage X while the brightness is set to a high value will have an
effect on the life of the display.
The changes you make to this parameter’s setting are enabled after you restart the
Grandstage X.
This will reset (initialize) the favorite data and system setting data. Any edited or newly created
favorite data will be overwritten, and your data will be lost. If you want to keep your favorite
data, save the data to an SD card (commercially available). This operation resets all system set-
tings, including calibration data. You will need to make the settings and perform calibration
once more.
While resetting, do not turn off the Grandstage X’s power, play the keyboard, or move any but-
tons, knobs or controllers. Doing so may cause the reset operation to fail, and you will be
unable to use the Grandstage X.