Grandstage X
-
System settings
80
Maximum usable storage capacity
FAT32: Up to 32 GB
FAT16: Up to 4 GB
When saving data to storage media on the Grandstage X, the “KORG/Grandstage X” directory is auto-
matically created in the media’s root directory. When you execute “SAVE Favorites”, a file with the
.FAV extension is created in this directory.
If the SD card is not in FAT16 or FAT32 format, the message “NO VALID MEDIA” is shown. Format the
storage media on your computer. If there is very little free space remaining on the storage media and
data cannot be saved, the message “NO FREE SPACE” is shown. In this case, use your computer to
delete any unnecessary files from the storage media to free up disk space. You can also use a differ-
ent storage media with more capacity.
Loading favorite data (LOAD Favorites)
Here’s how to load the favorite data (the 100 favorites that were saved to an SD card using the favor-
ite data save function) into the Grandstage X’s memory.
1 Insert the SD card that contains the favorite data you’ve saved into the SD card slot of the
Grandstage X.
2 Press the SYSTEM button, use the / buttons to select “LOAD Favorites”, and press the ENTER
button.
The filenames of the data saved on the SD card are shown in the display.
Note:
To cancel the load operation, press the SYSTEM or EXIT button to exit the system settings.
Note:
If no SD card is inserted in the SD card slot, or if there is no file extension .FAV in either the KORG/
Grandstage X directory or the directory created when you performed “SAVE Favorites” on the Grandstage X, the
“NO FAV FILE” appears in the display or “NO FILE/PATH” and the load operation is canceled. If this happens,
insert the SD card that contains the .FAV file you saved, use the / buttons to select “LOAD Favorites”, and go
to step 2.
3 If there is more than one file that can be loaded, use the / buttons to select the name of the
file to load.
4 Press the ENTER button and press the second function button from the right to load.
After the load operation is done, “DONE” is shown in the display.
5 Press the SYSTEM or EXIT button to finish the system settings.
Only the .FAV files are shown, and you can select or load the files. Note that if you change the
directory, folder hierarchy or filename using your computer, you will no longer be able to load
the file.
The Grandstage X recognizes the .FAV file extension. If you change the file extension on a com-
puter or other device, the Grandstage X will recognize this as an undefined file, and will not be
able to load it. The filenames saved by the Grandstage X are seven characters long. If you add
more characters to a filename using your computer or other device, you may no longer be able
to display any of the filenames on the storage media.
This operation overwrites all of the favorite data that’s saved on the Grandstage X. If you want
to keep your favorite data, save the data to an SD card (commercially available).
To Next Page
Loading...
