11
Introduction
• In Style Play and Song Play mode: First select one of the
Upper tracks. Then keep SHIFT pressed and move the
slider, to proportionally change the volume of all Upper
tracks at the same time.
• In Style Play mode: First press TRACK SELECT and select
one of the separate Style tracks. Then keep SHIFT pressed
and move the slider, to proportionally change the volume
of all Style tracks at the same time.
• In Sequencer mode: Keep SHIFT pressed and move the
slider, to proportionally change the volume of all Song
tracks at the same time.
5 ASSIGNABLE SWITCH
This is a freely assignable switch (see “Pad/Switch: Assignable
Switch” on page 98 for information on how to assign functions
to them). By default, it controls Ritardando.
6 ACCOMP. (Accompaniment)
In Style Play and Sequencer-Backing Sequence mode, use this
button to turn the Accompaniment tracks (ACC1 ~ ACC5) on
or off.
On After pressing START/STOP, the full accompani-
ment plays, according to the detected chords.
Off No chords detected. After pressing START/STOP,
only the Drum and Percussion accompaniment
tracks can play.
You can jump to the Style Play > Split pane > Chord
Recognition parameter by keeping SHIFT pressed, and pressing
the ACCOMP. button.
7 MEMORY
This button turns the Lower and Chord Memory functions on
or off. Go to the “Preferences: Style Preferences” edit page (Style
Play mode, see page 99) to decide if this button should be a
Chord Memory only, or a Lower/Chord Memory button. When
it works as a Lower/Chord Memory:
Note: This function can be automatically activated by playing the
keyboard harder. See “Velocity Control” on page 99.
On The sound on the left of the split point, and the
chord for the automatic accompaniment, are kept
in memory even when you raise your hand from
the keyboard.
Off The sound and chords are released as soon as you
raise your hand from the keyboard.
SB
S
][
9
G
O
c`
U
Q
N
C
P
V
M
Ld
Z
ab
R
T
WXY
\
Pa500-110UM-ENG.book Page 11 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
