Korg PA 500 - Page 224

220
Media edit mode
Save
Saving a single bank
You can save a single User bank with a single operation. A bank
corresponds to a button on the control panel of the instrument
(i.e. a button of the STYLE section).
1. Insert a card into the card drive.
2. The full content (“All”) of the internal memory is already
shown. Select it, and press Open to open it. A list of User
data types appear (each type is a separate folder).
3. Select the folder containing the type of data you wish to
save, and press Open to open it. The list of contained banks
is shown.
4. Select the bank to be saved, and press Save To to confirm
the selection. The list of files in the card is shown.
5. At this point, you can:
• Press the New SET button and create a new “.SET” folder
(see “Creating a new “.SET” folder” on page 221), or
• Select an existing “.SET” folder, and press Save to confirm.
6. A dialog box appears, asking you to select one of the avail-
able User locations inside the folder:
In the above dialog box, the previously selected bank of
Styles will be saved to the bank User 01 (corresponding to
the USER1 button) inside the selected folder. Two User
banks are available.
7. Press OK to confirm, or Cancel to abort.
Warning: After confirming, the same bank in the target folder
is deleted.
Saving a single item
You can save a single User item with a single operation.
1. Insert a card into the card drive.
2. The full content (“All”) of the internal memory is already
shown. Select it, and press Open to open it. A list of User
data types appear (each type is a separate folder).
3. Select the folder containing the type of data you wish to
save, and press Open to open it. The list of contained banks
is shown.
Pa500-110UM-ENG.book Page 220 Friday, March 28, 2008 11:12 AM