34
Playing Sounds
Selecting a Sound and playing it on the keyboard
3 Press the Upper 1 track’s area in the display, to open the Sound Select
window.
Note: You can also
open the Sound Select
window by pressing one
of the buttons in the
PERFORMANCE/SOUND
SELECT section – pro-
vided the LED on the
SOUND SELECT button is
on. This will let you jump
directly to the desired
Sound bank.
4 Select a Sound from the Sound Select window.
5 Play the Sound on the keyboard.
Note: You can leave
the Sound Select win-
dow open in the display,
even after selecting a
Sound, by setting the
Display Hold option to
On (see “Display Hold
On” on page 206).
i
The selected Sound is high-
lighted. Press a Sound’s name to
select it.
Press one of the side tabs to
select a different Sound bank.
Press one of the lower tabs to
select a different Sound page.
A Previous and Next Page pair of
button may appear in this area,
when more than five pages are
available.
The currently
selected Sound
also appears on
the page header.
Target track for
the selected
Sound
The triangle means
you can touch this
name to open a
Select window
Sound bank icon
Sound’s name
Set of banks. [1/8] corresponds to
the top row of Factory Sounds on
the control panel,
[9/16] to the lower row. [User] are
the User Sounds.
The Sound Select window closes,
and the main screen appears
again, with the selected Sound
assigned to the Upper 1 track.
i
Pa500-110UM-ENG.book Page 34 Friday, March 28, 2008 11:12 AM
To Next Page
Loading...
