Korg R3 Effect Guide

Effect parameters
27
Resonanc (Resonance) [000…127]
Sets the intensity of resonance for the voice pattern. A
larger value will add more character to the sound.
Drive [000…127]
Sets the degree of distortion.
Mod Src (Modulation Source) [Auto, LFO, Ctrl]
Selects the modulation source.
Mod Int (Modulation Intensity) [–63…+63]
Sets the depth of modulation produced by the modula-
tion source.
Response (Mod Response) [000…127]
Adjusts the response to the modulation effect. A setting
of 0 produces a slow response.
Env Sens (Envelope Sensitivity) [000…127]
When “Mod Src” is Auto, adjusts the sensitivity of auto
operation.
EnvShape (Envelope Shape) [–63…+63]
When “Mod Src” is Auto, specifies the sweep curve.
LFO Sync (LFO BPM Sync) [Off, On]
Specifies whether the LFO cycle will be synchronized
with the tempo specified by the [TEMPO] knob or MIDI
clock.
☞ p.5 “LFO Sync (LFO BPM Sync)”
LFO Freq (LFO Frequency) [0.01…100.0Hz]
Sets the LFO speed if “BPM Sync” is Off.
☞ p.5 “LFO Freq (LFO Frequency)”
SyncNote (LFO SyncNote) [8/1…1/64]
Sets the LFO frequency as a proportion of the tempo set
by the [TEMPO] knob if “BPM Sync” is On.
☞ p.5 “SyncNote (LFO SyncNote)”
LFO Wave (LFO Waveform)
[Saw, Square, Triangle, Sine, S&H]
Selects the LFO waveform.
☞ p.5 “LFO Wave (LFO Waveform)”
LFOShape (LFO Shape) [–63…+63]
☞ p.5 “LFOShape”
Key Sync (LFO Key Sync) [Off, Timbre]
Specifies whether the LFO will be reset by note-on.
☞ p.5 “Key Sync (LFO KeySync)”
IniPhase (LFO Init Phase) [000…180°]
Sets the starting location of the waveform if “Key Sync”
is Timbre.
☞ p.5 “IniPhase (LFO Init Phase)”
Ctrl Src (Control Source) [Off, Velocity…MIDI3]
Selects the control source. The selected source will con-
trol the filter if “Mod Src” is Ctrl.
☞ p.6 “Ctrl Src (Control Source)”

Korg R3 Specifications

General

Brand	Korg
Model	R3
Category	Synthesizer
Language	English