Effect parameters
3
Effect parameters
•
[parameter name]
only MFX
:
This parameter will be
displayed and can be set only when the effect is
used by a master effect.
•
[parameter name]
only IFX
:
This parameter will be
displayed and can be set only when the effect is
used by an insert effect.
•
[effect name]
double size
:
This effect can be selected
only for insert effect 1. If you select this type of
effect, you can’t use insert effect 2.
•
[parameter name]
: This indicates a parameter
you can select for “Fx Knob.” You can assign the
parameter to a front panel knob and edit it while
you perform.
• Common parameters:
Dry/Wet [Dry, 99:1…1:99, Wet]
Fx Knob [available selections depend on the type of
effect]: Choose the effect parameter that you want to
assign to a front panel knob.
1. S.Comp
(Stereo Compressor)
This effect compresses the input signal to regulate the
level and give a “punchy” effect. This is useful when ap-
plied to sounds that have a strong attack.
If using this for the master effect, you can link the left
and right channels or make them operate independent-
ly.
Env Sel (Envelope Select)
only MFX
[LR Mix, LR Indv.]
When L/R Mix is selected for this parameter, the left
and right channels are linked to control the Limiter us-
ing the mixed signal.
With L/R individually, the left and right channels con-
trol the Limiter individually.
When using this effect type for an insert effect, this
parameter is fixed at LR Mix.
Sens (Sensitivity) [001…127]
The “Sens” parameter sets the sensitivity of the com-
pressor. If this parameter is set to a higher value, lower
level sounds will be boosted. With a higher Sensitivity,
the overall volume level is higher. To adjust the final
volume level, use the “Output Level” parameter.
Attack [000.1…500.0ms]
Sets the attack level.
OutLevel (Output Level) [000…127]
This parameter controls the output level.
Left
Right
Dry / Wet
Dry / Wet
Stereo In - Stereo Out
Compressor
Compressor
Envelope Select (IFX: LR Mix)
Output Level
Output Level
Envelope - Control
Envelope - Control
Sensitivity=100
Sensitivity=40
Dry
Wet
Time
Level
Compressor - Sensitivity
Louder
Dry
Wet
Time
Level
Attack=80
Attack=20
Compressor - Attack