Shift functions
15
rnd (Random): Notes will be played randomly.
trG (Trigger): The notes you are holding down will
be played simultaneously at the current tempo.
If you are holding down more notes than the
maximum polyphony, the lowest pitches you are
holding down will be played, up to the maximum
polyphony.
3. Press the favorites buttons A–H to turn o
the button (note o) and change the note
corresponding to the step to a rest.
4. Press the SHIFT button to exit the arpeggio pattern
settings.
Shift functions
Theshiftfunctionsareusedtospecifyvariousseings
fortheRK-100S2.Tochangeaseing,holddownthe
SHIFTbuonandpresstheappropriatebuon.
Aside from the functions explained below, you can hold
downtheSHIFTbuonwhileoperatingthebuonsand
lever with labels encircled by a box (such as “HOLD”
or “FAVORITE BANK”) to make the sound sustain, or
switch between favorite banks.
Toexittheshiftfunction,presstheSHIFTbuon.In
addition,ifnobuonispressedforasetlengthoftime,
the shift function will automatically be exited, and the
RK-100S 2 will return to a condition where a program
can be selected.
Theprogramsassignedtothefavoritesbuonsand
theseingsoftheshiftfunctionsaresavedwhenthe
RK-100S 2
ispoweredo.Ifthebaeriesarenearing
theendoftheirservicelifeandfavoritesbuonA
isblinking(referto“Baerytypeandremaining
power” on page 17),theseseingscannotbesaved.
If you have an AC adapter (optional), connect it.
Velocity curve
This allows you to specify the way that the volume and
tone changes according to the keyboard velocity (force
used to strike keys).
1. Hold down the SHIFT button and press the
favorites A button.
Thevelocitycurveseing
appears in the display.
2. Use the OCTAVE +/- buttons or
the SOUND/FAVORITE BANK
lever to specify the velocity
curve.
Cu.1 This curve requires you to play strongly in
ordertoproduceaneect.
Cu.2, 3 |
Cu.4 This is the typical curve.
Cu.5 |
Cu.6 Thiscurveproducesaneectwithout
requiring you to play very strongly.
4
5
Strength
(MIDI Velocity)
ppp
MIN (1)
MAX
(127)
3
8
7
6
2
1
f