Korg RK-100S 2 User Manual

RK-100S 2 Owner's Manual
16
Cu.7 Thiscurveproducesafairlysteadyeectwith
lilechangeformedium-strengthplaying.
Cu.8 Thiscurveproducesafairlysteadyeect
withlilechangeformedium-strength
playing(aaercurvethan7).
127 All notes will sound at maximum velocity
(127).Thisseingmimicsthebehaviorof
early analog synths.
Cu.7and8producelilechangeformedium-
strength playing. However, these curves will
produce a great deal of change with softly played
notes,sotheymaybemorediculttocontrol.
Choose the curve that is most appropriate for your
playingdynamicsorfortheeectyouwantto
obtain.
3. Press the SHIFT button to exit the shift function.
Long ribbon velocity
This allows you to specify the velocity when using the
long ribbon controller to play scales.
1. Hold down the SHIFT button and press the
favorites B button.
Thevelocityseingappearsin
the display.
2. Use the OCTAVE +/- buttons or
the SOUND/FAVORITE BANK
lever to specify the velocity
setting.
Thevelocityseingrangeis1–127.
If oFF is selected, no sound is produced when the
long ribbon controller is used.
3. Press the SHIFT button to exit the shift function.
Global MIDI channel
In order to exchange data with a connected external
MIDI device, you must set the RK-100S 2’s Global MIDI
channel to match the MIDI channel of the external MIDI
device.
1. Hold down the SHIFT button and press the
favorites C button.
The number of the Global MIDI
channel appears in the display.
2. Use the OCTAVE +/- buttons or
the SOUND/FAVORITE BANK
lever to specify the Global MIDI
channel.
3. Press the SHIFT button to exit the shift function.
4. Set the MIDI channel of the connected external
MIDI device.
Note: For details on how to set the MIDI channel of the
external MIDI device, refer to the owner’s manual of the
connected device.
Long ribbon MIDI channel
This allows you to specify the MIDI channel when using
the long ribbon controller to play.
Specifyaseingwhenusingaprogramwithsound
generation set to Multi (Voice mode: Multi) or when the
external MIDI device that’s connected to the MIDI OUT
jack is being played using the long ribbon controller,
instead of the keyboard.
 Whentheseingischanged,soundfromthe
RK-100S 2 can no longer be produced with the long
ribbon controller.
1. Hold down the SHIFT button and press the
favorites D button.
The number of the long ribbon
MIDI channel appears in the
display.
2. Use the OCTAVE +/- buttons
or the SOUND/FAVORITE
BANK lever to specify the MIDI
channel.
GLb: The MIDI channel will match the global MIDI
channel (see “Global MIDI channel“) .
r.01...r.16: 1ch..16ch
Tip: When using the long ribbon controller to control an
external MIDI device that’s connected to the MIDI OUT
jack,specifythesameMIDIchannelthat’sspeciedonthe
external MIDI device.
3. Press the SHIFT button to exit the shift function.
Note: When the arpeggiator is turned on, note messages
aretransmiedfromtheMIDIOUTjackwiththeglobal
MIDI channel.
Transpose
This allows you to specify overall pitch in steps of
a semitone (100 cents). Use this when you want to
transpose to suit the song you are playing over a range of
one octave up or down.
1. Hold down the SHIFT button and press the
favorites E button.
Thetransposeseingappearsin
the display.
2. Use the OCTAVE +/- buttons or
the SOUND/FAVORITE BANK
lever to specify the transpose
setting.
Thetransposeseingrangeisoneoctaveupor
down(-12–12).
3. Press the SHIFT button to exit the shift function.

Korg RK-100S 2 Specifications

General

Brand	Korg
Model	RK-100S 2
Category	Musical Instrument
Language	English