18
Listening to a demo song
Loading demo playback data
The TRITON Le contains demo songs (and preloaded
data). This data can be loaded in Global mode.
1 Press the [GLOBAL] key (the key will light).
You will enter Global mode.
Verify that the GLOBAL 1.1: System page is dis-
played. If it is not displayed, press the [EXIT] key.
2 Press the [F8] (“UTILITY”) key to access the Utility
menu.
3 Press the [F7] (“ ”) key to select “Load Pre-
load/Demo Data,” and press the [F8] (“OK”) key.
A dialog box will appear.
4 Use the [INC]/[DEC] keys to select the data that
you want to load.
In the “Kind” field, select the data that you want to
load.
In this case, select All (Preload PCG and Demo
Songs). When you execute the Load operation, the
demo song data and preloaded data will be loaded.
5 Press the [F8] (“OK”) key.
A dialog box will ask you for confirmation.
6 Press the [F8] (“OK”) key once again.
The preloaded data and demo song data will be
loaded.
Never turn off the power while the data is being
loaded.
If the Memory Protected dialog box appears, un-
check the memory protect setting, and perform the
Load operation again. (
☞p.42)
From the powered-off state, if you turn on the
power while holding down the [MENU] key and
[EXIT] key, the Load All (Preload PCG and Demo
Songs) operation will be executed automatically.
(The LCD screen will show a message of “Now
Writing Internal Memory.”) This will load all PCG
data and demo song data. Never turn off the
power while the data is being loaded.
Selecting and playing a demo
song in the Sequencer mode
1 Press the [SEQ] key (the key will light).
You will enter Sequencer mode.
2 Access the SEQ 1.1: Play/REC, Play/REC page.
If the SEQ 1.1: Play/REC, Play/REC page does not
appear, select it as follows.
1) Press the [MENU] key.
The LCD screen will show a list of the pages in
Sequencer mode.
2) Press the [F1] key to select “P/R,” and press the
[F8] (“OPEN”) key.
3) Press the [F1] key. The SEQ 1.1: Play/REC, Play/
REC page will be displayed.
3 Use the cursor keys [ ], [ ] to choose “Song
Select.”
The song name will be highlighted.
4 Use the [INC]/[DEC] keys or other VALUE control-
lers to select the demo song that you wish to play.
5 Press the [START/STOP] key.
The key will blink and the selected song will play.
6 If you wish to stop playback, press the [START/
STOP] key once again.
SEQ 1.1:
Play/REC
Play/REC page
Song Select
To Next Page
Loading...
Need help?
General
