KRAL KV - Heating System Special Design

15 Accessories
15.1 Heating
Installing the fluid heating system
Personnel qualification: o Fitter
Personal protective equipment: o Work clothing
o Protective gloves
o Safety boots
DANGER
Magnetic field.
Risk of death for persons with cardiac pacemaker, metallic implant or neurostimulator.
► Under no circumstances may persons with cardiac pacemakers, metallic implant or neurostimu-
lator perform work on the pump/pump unit.
072
1
1
072 Heating cover
1 Pipe connection
1. Remove the socket screws and rating plate at the end cover of the pump.
2. Mount the heating cover072 to the end cover using the supplied socket screws.
3. Mount the piping at the pipe connections1.
4. Mount the rating plate on the heating cover.
Commissioning the fluid heating system
DANGER
Magnetic field.
Risk of death for persons with cardiac pacemaker, metallic implant or neurostimulator.
► Under no circumstances may persons with cardiac pacemakers, metallic implant or neurostimu-
lator perform work on the pump/pump unit.
DANGER
Risk of injury through emitted pumped liquid.
The pump housing may burst through heat expansion of the pumped liquid.
► Open all the valves during the heating process.
1. Take the required heating-up periods into account Ä Accessories,Page40.
2. When setting the pressure and temperature of the heating fluid take the permissible operating
limits of the pump into account Ä Technical data,Page8.
15.1.4 Heating system special design
Please contact the manufacturer for special designs.
Operating instructions
OIK 09en-GB Edition 2019-11
43