Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
Setting up secure wireless access point:
1. Click AP Mode (Access Point Mode) and enter an SSID name and password.
AP Mode allows guests to join meetings without needing to login to the
corporate/institutional network.
• Under AP mode, there are 2 options: Legacy mode and Wi-fi quick connect.
In Legacy Mode, SSID should be min 4 and max 20 characters long at the gateway
client side. Password should be min 8 and max 50 characters long. In Legacy Mode,
the SSID will show without the addition of the numbers and letters.
If a user wants to create AP mode without password, they should leave password
field blank and then click ‘Apply’ (this option is only applicable for Linux users).
Figure 16: Legacy Mode Wi-fi Quick Connect: Enabling this will show the VIA_
SSID & Password UI. It which will show two field first for SSID with a prefix ‘VIA_’
and second for Password. It will have the SSID limit set to 10 characters and
password length of max 8 Characters.
Figure 17: Wifi Quick Connect
To Next Page
Loading...
