Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
• Select the channels at which the Wi-Fi SSID will be broadcasted (2 frequencies will be
available – 2.4 GHz and 5GHz), you can select one of them as per the requirement.
2. Select Enable Internet if your VIA Connect² device is connected to a network with
internet.
-OR- Select Activate Standalone Wi-Fi to create an autonomous network without
Internet access.
3. Select AP Isolation to prevent Wi-Fi users from connecting to other through the router.
Each user gets a private connection that protects them from harm by malicious users.
4. Click Apply; The secure wireless guest access point is set up.
Wi-Fi Direct (Windows Client & Linux Gateway) – VIA 4.1
1. Working with Wi-Fi direct option allows the user wireless presentation & collaboration
without connecting the gateway to the company LAN.
2. Wi-Fi direct also enables to work with Miracast and Wi-Fi in parallel.
3. MAC users are currently not supported. Wi-Fi direct will appear only on Linux gateways
and Windows desktop.
4. Wi-Fi direct will auto-set on the remote Windows client virtual Ethernet.
5. This virtual network runs alongside the current setup, letting the user use the internet
and connect through VIA at the same time.
Our existing gateways will need a
dongle.
To utilize this feature, it is essential to have a Wi
-Fi dongle that supports Wi-Fi Direct/Wi-Fi
P2P. Here are some examples of approved Wi
-Fi dongles:
Manufacturer Model
Edimax EW-7822ULC
Edimax EW-7822UAD
Toplinkst TOP-4608AC
Toplinkst TOP-4610AC
Netgear A6150
The client will have its own internet access.
Wi-Fi direct dongle is a must.
To Next Page
Loading...
