Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
Setting Wi-fi Direct:
1. Ensure the dongle is connected to the gateway.
2. Go to Dashboard > Device Management > Network Settings > Wi-Fi-direct tab will
appear.
3. We’ll see 2 options under Wi-Fi direct tab – Standalone and With LAN.
With LAN:
1. We can login through the Wi-Fi direct tab as well as LAN IP.
2. Enter valid SSID and enter PIN – 4 digits.
3. Select frequency – 2.4GZ or 5 Gz.
4. Click ‘Apply’.
5. System will reboot.
6. To connect with SSID, launch VIA client and go to Wifi tab
7. Now, the SSID created will be appear with a prefix of VIA_D_.
8. The Wi-Fi icon will appear with a ‘D’ in green color.
9. When clicked on via client, popup will appear.
Figure 18: With LAN option
To Next Page
Loading...
