Kramer Electronics Ltd.
VIA Connect² – For Web Administrator: Gateway Management Pages
Figure 19: SSID on VIA Client
With Standalone:
1. We can login through the Wi-Fi direct tab only.
2. Enter valid SSID and enter PIN – 4 digits.
3. Select frequency – 2.4GZ or 5 Gz.
4. Click ‘Apply’.
5. System will reboot.
6. To connect with SSID, launch VIA client and go to Wi-Fi tab.
7. Now, the SSID created will be appear with a prefix of VIA_D_.
8. The Wi-Fi icon will appear with a ‘D’ in green color.
9. When clicked on VIA client, popup will appear.
To Next Page
Loading...
