Kramer VP-427X1

Kramer Electronics Ltd.
VP-427X1 – Operating and Controlling VP-427X1
11
Adjusting Image Parameters
VP-427X1 enables adjusting the image parameters such as contrast, brightness and so on.
To adjust the image parameters:
1. On the front panel press MENU. The menu appears.
2. Click Picture and define the image parameters according to the information in the
following table:
Menu Item
Function
Contrast
Set the contrast.
Brightness
Set the brightness.
Finetune
Video
HUE – Set the color hue.
SATURATION – Set the color saturation.
SHARPNESS – Set the sharpness of the picture.
NOISE REDUCTION – Select the noise reduction filter: Off
(default), Low, Middle or High.
Color
Set the Red, Green and Blue shades.
Image parameters are adjusted.
Selecting an Input Signal
Select the VP-427X1 input source via the OSD menu.
To set the input source:
1. On the front panel press MENU. The menu appears.
2. Click Input and select the Source: HDBT (default) or HDMI.
An input signal is selected.