Kramer VP-440 - Page 49

Kramer Electronics Ltd.
VP-440 – Protocol 3000
47
AUD-LVL
Functions
Permission
Transparency
Set:
AUD-LVL
End User
-
Get:
AUD-LVL?
End User
-
Description
Syntax
Set:
Set audio level in specific amplifier stage
#AUD-LVL␠P1,P2,P3␍
Get:
Get audio level in specific amplifier stage
#AUD-LVL?␠P1,P2␍
Response
~nn@AUD-LVL␠P1,P2␍␊
Parameters
P1 (Input/Output)– 0=Input; 1=Output
P2 (Input/Output number valid according to the selected Input/Output according to P1) –
audio inputs=0 (HDMI 1), 1 (HDMI 2), 2 (HDMI 3), 3 (HDMI 4), 4 (PC 1), 5 (PC 2); Audio outputs=0;
P3 – 0~100; minus sign precedes negative values.
++ increase current value,
-- decrease current value
AV-SW-MODE
Command Name
Permission
Transparency
Set:
AV-SW-MODE
End user
Public
Get:
AV-SW-MODE?
End user
Public
Description
Syntax
Set:
Set input auto switch mode (per
output)
#AV-SW-MODE␠layer,output_id,mode␍
Get:
Get input auto switch mode (per
output)
#AV-SW-MODE?␠layer,output_id␍
Response
~nn@AV-SW-MODE␠layer,output_id,mode␍␊
Parameters
layer – 1 - Video
2 - Audio
3 - Data
4 - IR
5 - USB
output_id - 1….num of system outputs
mode - 0 - manual
1 - priority switch
2 - last connected switch