Kramer VP-440X

Kramer Electronics Ltd.
VP-440X – Protocol 3000
65
Function
Description
Syntax
Parameters/Attributes
Example
TREBLE
Set audio treble level.
COMMAND
#TREBLEio_index, treble_level<CR>
FEEDBACK
~nn@TREBLEio_index, treble_level<CR><LF>
io_index – 1
bass_level – 0-30
Set audio treble level to 10:
#TREBLE1,10<CR>
TREBLE?
Get audio treble level.
COMMAND
#TREBLE?io_index<CR>
FEEDBACK
~nn@TREBLEio_index, treble_level<CR><LF>
io_index – 1
bass_level – 0-30
Get audio treble level:
#TREBLE?1<CR>
VERSION?
Get firmware version
number.
COMMAND
#VERSION?<CR>
FEEDBACK
~nn@VERSIONfirmware_version<CR><LF>
firmware_version – XX.XX.XXXX
where the digit groups are:
major.minor.build version.
Get the device firmware version
number:
#VERSION?<CR>
VFRZ
Set freeze on selected
output.
COMMAND
#VFRZout_index, freeze_flag<CR>
FEEDBACK
~nn@VFRZout_index, freeze_flag<CR><LF>
out_index – Number that indicates
the specific output: 1.
freeze_flag – On/Off
0 – Off
1 – On
Set freeze on selected output:
#VFRZ1,1<CR>
VFRZ?
Get output freeze status.
COMMAND
#VFRZ?out_index<CR>
FEEDBACK
~nn@VFRZout_index, freeze_flag<CR><LF>
out_index – Number that indicates
the specific output: 1.
freeze_flag – On/Off
0 – Off
1 – On
Get output freeze status:
#VFRZ?1<CR>
VID-RES
Set output resolution.
“Set” command with
is_native=ON sets native
resolution on selected
output (resolution index
sent = 0). Device sends as
answer actual VIC ID of
native resolution.
To use “custom
resolutions” (entries 100-
105 In View Modes),
define them using the
DEF-RES command.
COMMAND
#VID-RESio_mode, io_index, is_native, resolution<CR>
FEEDBACK
~nn@VID-RESio_mode, io_index, is_native, resolution<CR><LF>
io_mode –Output
1 – Output
io_index – Number that indicates the
specific input or output port: 1.
is_native – 0
resolution – Resolution index
200=Native
201=640x480
202=800x600
203=1024x768
204=1280x768
205=1360x768
206=1280x720
207=1280x800
208=1280x1024
209=1440x900
210=1400x1050
211=1680x1050
212=1600x1200
213=1920x1080
214=1920x1200
215=2560x1600
216=2560x1440
217=480p
218=576p
219=720p50
220=720p60
221=1080p24
222=1080p25
223=1080p30
224=1080p50
225=1080p60
226=4k24
227=4k25 (HDMI only)
228=4k30 (HDMI only)
229=4k50
230=4k60
Set output resolution to 4k24:
#VID-RES1,1,1,226<CR>