Safety
12
Pos: 14.7.11 /BA/Si cherheit/Hydraulikan lage @ 2\mod_1203503691 986_78.docx @ 66225 @ @ 1
4.6 Hydraulic system
1 The hydraulic system is pressurised!
2 When connecting hydraulic cylinders and motors, make sure the hydraulic hoses are
connected as specified!
3 When connecting the hydraulic hoses to the tractor hydraulics, make sure that the
hydraulics of both the tractor and the implement have been depressurized!
4 In the case of hydraulic connections between tractor and machine, the coupling sleeves and
plugs should be marked to ensure a proper connection! If the connectors are interchanged,
the function will be reversed (e. g. raising/lowering) - Risk of accident!
5 When searching for leaks, use suitable aids to avoid the risk of injury!
6 Liquids escaping under high pressure (hydraulic oil) can penetrate the skin and cause
serious injury! Seek medical help immediately should injuries occur! Danger of infection!
7 Before working on the hydraulic system, depressurise the system and switch off the engine!
Pos: 14.7.12 /Überschr iften/Überschr iften 2/P-T/Reifen @ 0\ mod_1197357995667_78. docx @ 18075 @ 22 @ 1
4.7 Tyres
Pos: 14.7.13 /BA/Si cherheit/Reifen @ 0\ mod_1195646435716_78. docx @ 1346 @ 2 @ 1
1 When working on the tyres, make sure that the implement is safely lowered and secured
against rolling (wheel chocks).
2 Installing wheels and tyres requires adequate knowledge and suitable tools!
3 Repair work on the tyres and wheels should be done by specially trained personnel using
appropriate installation tools only!
4 Check tyre pressure regularly! Inflate the tyres to the recommended pressures!
5 Check the wheel nuts periodically! Missing wheel nuts can result in a wheel falling off and
the machine tipping over.
Pos: 14.7.14 /Layout Module ---------------Seitenumbruch------- --------- @ 0\mod_1196175311 226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
