Krone Swadro TC 880 - Collapsible Tine Arm Operation; Moving Hoop Guards to Working Position

Operation
66
Pos: 29.53 /BA/Bedienun g /Schwader/Schwaden/ Kreiselbetrieb wählen @ 134\mod_1350632999 853_78.docx @ 1190195 @ 332233 @ 1
11.9 Selecing Rotor Operation
Depending on how the machine is equipped, different rotor operations can be selected with the
rotary rake.
Twin-rotor operation: Swath placement to the middle with right and left rotor
Single rotor operation: Swath placement to the middle with left rotor
Single rotor operation: Swath placement to the middle with the right rotor
Pos: 29.54 /BA/Bedienun g /Schwader/Schwaden/ ÜS_2_Kreiselbetr iebe (bei Ausführung hy draulische Einkrei selaushebung) @ 134\mo d_1350632794166_78. docx @ 1190167 @ 22 @ 1
11.10 Rotor Operation (With Hydraulic Single-Rotor Lifting Mechanism Design)
Pos: 29.55 /BA/Bedienun g /Schwader/Schwaden/ Kreiselbetriebe bei Ausführung hydr aulische Einkreiselau shebung @ 225\mod_139237 7947864_78.doc x @ 1821250 @ 233 @ 1
SW700086_1
Fig. 44
Single-Rotor Operation with Right Rotor
To swath just with the right rotor, proceed as follows:
• Move the rotor arms to the working position.
• Move the switching valve (1) to position (1).
• Activate the single-acting control unit to lift the left rotor into headland position.
Twin-Rotor-Operation
To swath with both rotors, proceed as follows:
• Move the rotor arms to the working position.
• Bring switching valve (1) to position (II).
• Move the single-acting control unit to position (“Lowering / Float Position”).
Single-Rotor Operation with Left Rotor
To swath just with the left rotor, proceed as follows:
• Move the rotor arms to the working position.
• Move the switching valve (1) to position (III).
• Activate the single-acting control unit to lift the right rotor into headland position.
Pos: 29.56 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ 33 @ 1