Control and Display Elements
27
Pos: 21.6 /BA/Maschi nenbeschreibung/Sc hwader/Funktionsüb ersicht elektrisc he Bedieneinheit_SW 900# @ 158\mod_13649144109 95_78.docx @ 1394465 @ @ 1
With electric single-rotor lifting mechanism design
SW700087
2
5
3
1
4
SW900002
6
Fig. 7
The following table explains the function of the individual switches.
Switch Function
1) Main switch Switch on (I) and switch off (0) control unit.
2) Indicator light (red) Lit when control unit is switched on.
3) Rocker switch
(momentary-action)
Set the working depth on the left rotor.
4) Rocker switch
(momentary-action)
Set the working depth on the right rotor.
5) Rocker switch
Selects the rotor that is to be lifted or lowered. The actual
movement is made via the single-acting control unit.
Pos. I
Single-rotor lifting mechanism of left rotor:
The right rotor remains in working position. The
left rotor is lifted or lowered.
Pos. II
Twin-rotor lifting mechanism:
Both rotors are lifted or lowered.
Pos. III
Single-rotor lifting mechanism of right rotor:
The left rotor remains in working position. The
right rotor is lifted or lowered.
6) Rocker switch
Depending on rocker switch (5)
Pos. IV
Changing over from headland position to working
position and vice versa.
Pos. V
Changing over from headland position to transport
position and vice versa.
Pos: 22 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.doc x @ 4165 @ 2 @ 1
To Next Page
Loading...
