Krone Swadro TC 880 - Rotor Inclination with Tandem Chassis

104 pages

To Next Page

To Previous Page

Maintenance – lubrication chart

Lubricate the lubrication points every 20 operating hours.

Pos: 36.31 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

Main Page

1 Table of Contents3
2 Foreword6
3 To this Document7
- Validity7
  - Direction Information7
- Identifying Symbols in the Operating Instructions7
- Identification of the Hazard Warnings7
4 Safety8
- Purpose of Use8
- Intended Use8
- Safety Instructions and Accident Prevention Regulations9
- Hitched Implements10
- PTO Operation11
- Hydraulic System12
- Tyres12
- Maintenance13
- Working in the Vicinity of Power Transmission Lines14
- Unauthorised Conversion/Modification and Spare Parts Production14
- Inadmissible Modes of Operation14
- Safety Instructions on the Machine14
5 Machine Description15
- Machine Overview15
- Identification Plate16
- Information Required for Questions and Orders16
  - Contact16
- Introduction17
  - Re-Ordering the Adhesive Safety and Information Labels17
  - Affixing the Adhesive Safety and Information Labels17
- Position of the Adhesive Safety Stickers on the Machine18
6 Technical Data of the Machine20
- Technical Data20
- Lubricants24
  - Filling Quantities and Lubrication Designations for Gearboxes24
- Tyres24
- Airborne Sound Emission24
7 Control and Display Elements25
8 Commissioning28
- General28
- First Installation29
- Preparations on Tractor29
  - Adjusting the Lifting Height29
- Connecting the Lower Link30
- Height of Tractor Lower Suspension Arms30
- PTO Shaft31
  - Length Adjustment31
- Regulating Direction of Travel32
- Checking the Locking of the Transport Position33
- Setting the Rotor Inclination34
9 Start-Up40
- Mounting Onto the Tractor40
- Connecting the Lower Link40
- Hydraulics41
  - Special Safety Instructions41
  - Connecting the Hydraulic Lines42
- Lighting Connection43
- Connecting the Electrical Controls44
- Install the PTO Shaft45
- Using the Safety Chain46
- Swivelling Parking Support into Transport Position48
10 Driving and Transport49
- Travelling on an Incline49
- Fixing the Rotors51
- Lifting the Rotor Arms to Transport Position52
- Protecting the Tine Tips (Transport Position and Rotary Rake Switched Off)56
11 Operation57
- Preparation for Swathing57
- Removing the Tine Protections from the Tine Tips57
- Lowering the Rotor Arms into Working Position58
- Releasing Rotor Locking Device61
- Move the Hoop Guards to the Working Position62
- Move the Hoop Guards to Transport Position62
- Adjusting the Working Width63
- Setting the Working Depth64
- Selecing Rotor Operation66
- Rotor Operation (with Hydraulic Single-Rotor Lifting Mechanism Design)66
- Rotor Operation (with Electric Single-Rotor Lifting Mechanism Design)67
- Travelling on an Incline68
- Travelling Speed und Drive Speed68
- Swathing69
- Overload Protection69
- Parking70
12 Settings72
- Adjustable Throttles72
13 Maintenance73
- Special Safety Instructions73
- Test Run73
- Maintenance Table74
- Tightening Torques75
- Tightening Torques (Countersunk Screws)76
- Deviating Torque77
  - Testing the Screws on the Tines77
  - Torque of Wheels on the Running Gear77
- Tyres78
  - Checking and Maintaining Tyres78
- Replacing the Tine Arms (in Case of Repair)80
- Replacing the Tines (in Case of Repairs)82
14 Maintenance - Lubrication Chart83
- Special Safety Instructions83
- Lubrication Points on the Universal Shafts83
- Lubrication Points on the Machine84
15 Maintenance - Hydraulic System86
16 Maintenance - Gearbox87
- Main Gearbox87
17 Special Equipment88
- Tine Loss Safeguard88
- Chain for Height Restriction of Suspension Arms89
18 Placing in Storage90
- Special Safety Instructions90
- At the End of the Harvest Season91
- Before the Start of the New Season92
- Special Safety Instructions92
19 Malfunctions - Causes and Remedies93
- Special Safety Instructions93
20 Appendix95
21 Index96

Krone Swadro TC 880 - Rotor Inclination with Tandem Chassis

Table of Contents

Other manuals for Krone Swadro TC 880

Related product manuals