KStar MEMO PLUS RT II (MP9100RTII-0.9) 1-3K User Manual

28
0TBattery string
number and
type
setting0T(4)
function setting key for more
than half a second(less than 2
seconds), then come to setting
interface of battery, the letters
“bAt” will stop flashing. The
numerical value below the
“bAt” will flash. Press and
hold the scroll key for more
than half a second (less than 2
seconds), select the numerical
value in accordance with the
real connected battery strings.
0T③．0TConfirm the battery strings
setting interface。
After selecting numerical value,
press and hold the function
setting key for more than half
a second (less than 2 seconds).
Now, the battery strings setting
is confirmed and the battery
type value below will flash。
0T ④ set the battery type in the
same way.
⑤Exit from the setting interface.
Press and hold function setting
key for more than half a
second (less than 2 seconds),
exit from the setting interface
and return to main interface.
Load segment
setting（5）
① Enter the setting interface.
Press and hold the function
setting key for more than 2
seconds, then come to setting
interface, Press and hold the
scroll key for more than half a
second(less than 2 seconds),
select the function setting,
choose battery setting
interface, at the moment, the
letters “Seg 1” will flash.
② Enter the load segment
setting interface. Press and hold
the function setting key for
more than half a second(less
than 2 seconds), then come to
setting interface of load
segment, the letters “Seg 1”
will stop flashing. The numerical
value below the “Seg 1” will
flash. Press and hold the scroll
key for more than half a
second (less than 2 seconds),
select the battery voltage,
10.5v， 11.0v， 11.5v(default is
10.5v)。
③Confirm the power shedding
shielding battery voltage
setting. After selecting
numerical value, press and hold

KStar MEMO PLUS RT II (MP9100RTII-0.9) 1-3K Specifications

General

Brand	KStar
Model	MEMO PLUS RT II (MP9100RTII-0.9) 1-3K
Category	UPS
Language	English