31 SUBSTANCES 268
2-stroke engine oil
Standard/classification
– JASO FC ( p. 282)
Guideline
– Only use high grade 2-stroke engine oil of a reputable brand.
Fully synthetic
Recommended supplier
Motorex
®
– Cross Power 2T
Brake fluid DOT 4 / DOT 5.1
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that possesses the corre-
sponding properties.
Recommended supplier
Castrol
– RESPONSE BRAKE FLUID SUPER DOT 4
Motorex
®
– Brake Fluid DOT 5.1
Coolant
Guideline
– Use only suitable coolant (even in countries with high temperatures). Using inferior antifreeze can result in corrosion and foaming.
– Use only coolant based on ethylene glycol.
Mixture ratio
Antifreeze protection: −25… −45 °C (−13…
−49 °F)
50 % corrosion inhibitor/antifreeze
50 % distilled water
Coolant (mixed ready to use)
Antifreeze −40 °C (−40 °F)
Recommended supplier
Motorex
®
– COOLANT M5.0
Engine oil (15W/50)
Standard/classification
– JASO T903 MA ( p. 282)
– SAE ( p. 282) (15W/50)
Guideline
– Use only engine oils that comply with the specified standards (see specifications on the container) and that possess the corre-
sponding properties.
Recommended supplier
Motorex
®
– Top Speed 4T
Fork oil (SAE 4) (48601166S1)
Standard/classification
– SAE ( p. 282) (SAE 4)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that possess the corresponding
properties.
To Next Page
Loading...
Need help?
General
