KTM 250 EXC EU User Manual

6 FORK, TRIPLE CLAMP 39
201722-11
Main work
– Pull the spring down. Mount the open end wrench on the hexagonal part.
201723-10
– Clamp the open end wrench in the vise. Release screw cap
1
but do not remove it
yet.
Special socket (T14047) ( p. 280)
201724-11
– Pull the spring down. Remove the open end wrench.
– Remove the screw cap.
– Remove the spring with the preload spacer(s).
6.2.14 Disassembling the cartridge
Info
The steps are identical for both fork legs.
Preparatory work
– Disassemble the fork legs. ( p. 36)
– Remove the spring. ( p. 38)
202480-10
Main work
– Degrease piston rod
1
and clamp it in the vise.
Clamping stand (T14049S) ( p. 280)
– Remove adjusting tube
2
. Unscrew spring guide
3
.
201726-12
– Remove spring seat
4
.
– Pull the piston rod out of the cartridge.

KTM 250 EXC EU Specifications

General

Transmission	6-speed
Ignition	Kokusan
Front Wheel	1.60 x 21"
Rear Wheel	2.15 x 18"
Seat Height	960 mm
Engine Type	2-stroke
Displacement	249 cm³
Bore x Stroke	66.4 mm x 72 mm
Cooling	Liquid-cooled
Front Suspension	WP Xplor 48, USD fork
Rear Suspension	WP XPLOR shock absorber with linkage
Front Brake	Disc brake
Rear Brake	Disc brake
Fuel Capacity	9 l