To Next Page
C
cynthia36Sep 10, 2025
Why do the headlight and parking light not light up on my KTM 400 LS-E/MIL?
- RRalph WilkinsSep 10, 2025
If the headlight and parking light on your KTM Motorcycle do not light up, the fuse may have blown. Replace the fuse.
Why do the headlight and parking light not light up on my KTM 400 LS-E/MIL?
If the headlight and parking light on your KTM Motorcycle do not light up, the fuse may have blown. Replace the fuse.
Why don't the turn signal, brake light, fan and horn work on my KTM Motorcycle?
If the turn signal, brake light, fan, and horn on your KTM Motorcycle don't work, the fuse may have blown. Replace the fuse.
General| Compression Ratio | 11.5:1 |
|---|---|
| Cooling | Liquid cooled |
| Displacement | 398.8 cc |
| Bore x Stroke | 89 mm x 64 mm |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Starter | Electric starter |
| Fuel Tank Capacity | 9.5 L |
Operation and adjustment of the clutch lever.
Usage for starting and jump-starting.
Operation and adjustment of the front brake lever.
Location of the chassis number on the steering head pipe.
Location of the engine number on the engine.
Operation and adjustment for cold starts.
Explanation of dashboard indicators and readings.
Positions and functions of the ignition switch.
Function of starter and safety switches.
Controls for headlight, grip heater, and camouflage light.
Function of the 12V socket and operation of the fuel filler cap.
Operation of the fuel tap positions (OFF, ON, RES).
Operation and gear selection with the shift lever.
Operation of the kickstarter for starting.
Location and adjustment of the foot brake pedal.
Adjusting compression and rebound damping of the front fork.
Adjusting compression, rebound, and spring preload of the shock absorber.
Folding and adjusting the rear view mirrors.
Adjusting the headlight beam angle based on load.
Mounting camouflage masks for headlights and taillights.
Features, mounting, and capacity of the tank bag.
Operating and securing the side trunks and top case.
Location and purpose of the passenger grab handles.
Parking the motorcycle using stands.
Essential checks and familiarization before the first ride.
Guidelines for engine break-in during the first 1000 km.
Safety advice for riding and using accessories.
Essential checks to perform before each ride.
Steps for starting a cold, warm, or flooded engine.
Safe procedure for starting with the kickstarter.
Procedures for starting from a standstill and accelerating.
Techniques for shifting gears and maintaining speed.
Methods for effective braking and downshifting.
Procedures for stopping the engine and parking safely.
Refueling and activating the low-octane fuel ignition curve.
Refueling with the correct octane fuel and curve selection.
Proper use of center and side stands for parking.
Maintenance tasks for the 1st and 2nd service intervals.
Maintenance tasks to be performed under separate order.
Maintenance tasks for the driver to perform regularly.
Procedure for removing and remounting the motorcycle seat.
Checking and adjusting for play in the steering head.
Bleeding the telescopic fork to release pressure.
Cleaning and maintaining fork dust boots.
Adjusting spring preload based on load.
Checking wear on the shock absorber's vibration absorber ring.
Lubricating the rocker arm and shock absorber linkage.
Checking and correcting the chain tension.
Proper methods for cleaning and maintaining the O-ring chain.
Checking chain wear and replacement criteria.
Design of calipers, pad types, and fluid recommendations.
Checking brake disk thickness and wear limits.
Adjusting the free travel of the hand brake lever.
Checking and refilling the front brake fluid level.
Checking the thickness of the front brake pads.
Adjusting the free travel of the foot brake lever.
Checking and refilling the rear brake fluid level.
Checking the thickness of the rear brake pads.
Steps for dismounting and mounting the front wheel.
Correct installation of the speedometer drive.
Steps for dismounting and mounting the rear wheel.
Checking rubber damping seals in the rear hub for wear.
Recommended tire brands, types, and pressure settings.
Checking and maintaining spoke tension for wheel stability.
Location, cleaning, and greasing of battery terminals.
Procedures for safely removing and installing the battery.
Using the automatic battery charge maintainer.
Function and replacement of the main fuse.
Identifying fuses for various electrical components.
Procedure for replacing the headlight bulb.
Procedure for replacing the parking lamp bulb.
Procedure for replacing rear brake and taillight bulbs.
Adjusting the headlight angle for different loads.
Adjusting clutch lever and checking hydraulic fluid.
Adjusting hand decompression and choke cables.
Adjusting free travel of the throttle grip cable.
Setting the engine's idle speed.
Draining water from the carburetor float chamber.
How the cooling system circulates coolant and prevents overheating.
Checking the coolant level and safety precautions.
Procedure for cleaning and oiling the air filter.
Recommended engine oil types and viscosity.
How to check the engine oil level.
Illustration of the engine oil circulation path.
Procedure for changing engine oil and filters.
Venting and filling the engine oil system.
Procedure for replacing the oil filter.
Diagnosing and fixing problems with engine starting.
Troubleshooting neutral light and clutch-related starting problems.
Diagnosing issues with idling and engine acceleration.
Troubleshooting flooded engines and spark plug problems.
Diagnosing reasons for engine overheating.
Troubleshooting common electrical system faults.
Recommended methods for cleaning the motorcycle.
Protecting the motorcycle from salt and corrosion.
Steps for storing the motorcycle for extended periods.
Warnings and advice for cleaning the motorcycle safely.
Protecting against road salt and corrosion.
Detailed steps for preparing the motorcycle for storage.
Details on frame, fork, suspension, brakes, tires, and wheels.
Specs for lighting, electrical systems, dimensions, weights, and loads.
Engine type, displacement, bore, and stroke details.
Fuel type, valve train, lubrication, and carburetor settings.
Transmission, ignition system, and cooling system details.
Torque values for wheel spindles and brake components.
Torque values for suspension and frame mounting points.
Torque values for various chassis fasteners.
Schematic of the motorcycle's electrical system.
Legend for wire colors used in the wiring diagram.
