KTM 690 SMC R EU 2021 - Removing the rear of the motorcycle from the wheel stand; Lifting the motorcycle with the front lifting gear; Taking the motorcycle off the front lifting gear

SERVICE WORK ON THE CHASSIS 11
47
11.4 Removing the rear of the motorcycle from the wheel stand
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
401943-10
– Secure the motorcycle against falling over.
– Remove the rear wheel stand and lean the vehicle on side
stand
1
.
11.5 Lifting the motorcycle with the front lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
Preparatory work
– Raise the motorcycle with the rear lifting gear. ( p. 46)
402344-01
Main work
– Move the handlebar to the straight-ahead position. Align the
lifting gear at the front with the adapters to the fork legs.
Front wheel work stand, small (61129965000)
Info
Always raise the motorcycle at the rear first.
– Lift the motorcycle at the front.
11.6 Taking the motorcycle off the front lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
– Park the vehicle on a firm and level surface.
312029-10
– Secure the motorcycle against falling over.
– Remove the front lifting gear.