KTM Freeride 350 - Chassis Specifications

TECHNICAL DATA - CHASSIS 98
Frame Perimeter, steel-aluminum composite frame
fork WP Suspension 4357 MXMA
Suspension travel
Front 250 mm (9.84 in)
Rear 260 mm (10.24 in)
Fork offset 20 mm (0.79 in)
Shock absorber WP Suspension 4618 BAVP DCC
Brake system
Front Disc brake with radially mounted four-piston brake caliper
Rear Disc brake with radially mounted dual-piston brake caliper
Brake discs - diameter
Front 260 mm (10.24 in)
Rear 210 mm (8.27 in)
Brake discs - wear limit
Front 2.5 mm (0.098 in)
Rear 3.5 mm (0.138 in)
Tire air pressure off road
Front 0.9 bar (13 psi)
Rear 0.7 bar (10 psi)
Tire air pressure, road
Front 1.5 bar (22 psi)
Rear 1.5 bar (22 psi)
Secondary ratio 11:48
Chain 5/8 x 1/4” X‑ring
Rear sprockets available 46, 48, 50
Steering head angle 67°
Wheelbase 1,428±10 mm (56.22±0.39 in)
Ground clearance, unloaded 325 mm (12.8 in)
Seat height, unloaded 895 mm (35.24 in)
Weight without fuel, approx. 101 kg (223 lb.)
Maximum permissible front axle load 135 kg (298 lb.)
Maximum permissible rear axle load 175 kg (386 lb.)
Maximum permissible overall weight 280 kg (617 lb.)
Battery YTX4L-BS Battery voltage: 12 V
Nominal capacity: 3 Ah
Maintenance-free
Speedometer battery CR 2430 Battery voltage: 3 V
Fuse 58011109110 10 A
Fuse 58011109120 20 A
23.1Lighting equipment
Headlight S2/socket BA20d 12 V
35/35 W
Parking light W5W/socket W2.1x9.5d 12 V
5 W
Indicator lamps W2.3W/socket W2x4.6d 12 V
2.3 W
Turn signal R10W/socket BA15s 12 V
10 W
Brake/tail light LED
License plate lamp W5W/socket W2.1x9.5d 12 V
5 W