CONTROLS 20
5.30Idle speed adjusting screw
401342-10
Idle speed adjusting screw 1 is located on the throttle valve body at the top left.
The idle speed adjusting screw has two functions.
Turning it controls the idle speed.
Pulling it out all the way raises the idle speed during a cold start.
Possible states
• RPM increase activated – Idle speed adjusting screw is pulled out all the way.
• RPM increase deactivated – Idle speed adjusting screw is pushed in all the way.
5.31Shift lever
B01023-11
Shift lever 1 is mounted on the left side of the engine.
B01023-10
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
5.32Foot brake lever
B01024-10
Foot brake lever 1 is located in front of the right footrest.
The foot brake lever is used to activate the rear brake.
5.33Side stand
B01025-10
The side stand 1 is on the left side of the vehicle.
To Next Page
Loading...
