KTM Freeride 350 - Service Work (as Additional Order)

SERVICE SCHEDULE 29
8.2Service work (as additional order)
S20N S60A S120A J1A
Change the front brake fluid. x
•
Change the rear brake fluid. x
•
Change the foot brake cylinder seals. x
• •
Change the hydraulic clutch fluid. x ( p. 57)
•
Grease the steering head bearing. x ( p. 43)
•
Service the fork. x
• • •
Service the shock absorber. x
• •
Change the spark plug and spark plug connector. x
•
Change the piston. x
•
Check/measure the cylinder. x
•
Check the cylinder head. x
•
Change the valves, valve springs and valve spring seats. x
•
Check the camshaft and cam lever. x
•
Change the connecting rod, conrod bearing and crank pin. x
•
Check the transmission and shift mechanism. x
•
Check the oil pressure regulator valve. x
•
Change the suction oil pump. x
•
Check the pressure oil pumps and lubrication system. x
•
Replace the timing chain. x
•
Check the timing assembly. x
•
Change all engine bearings. x
•
S20N: Once after 20 operating hours
S60A: Every 60 operating hours
S120A: Every 120 operating hours
J1A: Annually