SERVICE WORK ON THE ENGINE 88
B01119-10
– Remove the oil filler plug 1 with the O-ring from the clutch cover and fill up with
engine oil.
Engine oil (SAE 10W/50) ( p. 103)
Engine oil (SAE 10W/60) (00062010035) ( p. 103)
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
– Install and tighten the oil filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
– Start the engine and check that it is oil-tight.
To Next Page
Loading...
