1. Key switch
(A) Off
(B) On
(C)
Preheat
(D) Start
2. Tilt lever
The tilt lever is the lever to adjust the steering wheel to
proper position.
(1) Tilt lever (A) Pull
3. Head light switch
To turn on the head lights, turn the head-light-switch
clockwise. T
o turn off the head lights, turn the head-
light-switch counterclockwise.
(1) Head light switch
(A)
On
(B)
Off
4. Hazard light switch
1. When
pressing the hazard-light-switch, the hazard
lights
flash along with the indicator on the
instrument panel.
2. When pressing the hazard-light-switch again, the
hazard lights turn off.
NOTE :
• The hazard-light-switch is operative when the
key switch is only on position.
(1) Hazard light switch (A) Push on-off
5. Turn signal light switch
To indicate a right turn, turn the turn-signal-light-switch
clockwise.
To
indicate a left turn, turn the turn-signal-light-switch
counterclockwise.
When the left or right turn signal is activated in
combination with the hazard lights, the indicated turning
light will flash and the other light will stay on.
NOTE :
• Be sure to return the turn-signal-light-switch to
center position after turning.
INSTRUMENT PANEL, SWITCHES, AND HAND CONTROLS
INSTRUMENT PANEL AND CONTROLS
To Next Page
Loading...
