(A) Incorrect (B) Correct
4. Dumping and lowering the bucket
Dumping the bucket
1. Lift
the
bucket just high enough to clear the side of
the vehicle.
2. Move the tractor in as close to the side of the
vehicle as possible.
3. Then dump the bucket.
Lowering the bucket
1. After dumping
the bucket, back away from the
vehicle while lowering and rolling back the bucket.
(1) Loader control lever
(A)
Down and dump
(B)
Dump
(C) UP and dump
(D) Up
(E) Roll back
(F) Down and roll back
(G) Down
(H) Float
5. Precautions for operating the
loader with float control
• During operation of the loader on hard surface,
keep
the bucket level and put the lift control in the
float position to permit the bucket to float on the
working surface. If hydraulic down pressure is
exerted on the bucket, the bucket will wear faster
than normal.
(A) Float
• The float
position
will also avoid mixing of surface
material with stockpile material. The float position
will reduce the chance of surface gouging while
removing snow or other material, or when working
with a blade.
TECHNIQUES FOR OPERATING THE LOADER AND THE TRACTOR
OPERATING THE LOADER