14. Place the protective caps and plugs on the ends of
the quick coupler
.
(1) Protective caps
15. Wear the seat belt and slowly back the tractor away
from the loader
.
STORING THE LOADER
1. Store the loader in a clean, dry place.
2. Make sure that the loader is properly supported.
3.
Check the hydraulic hoses and connections. Repair
or replace the hydraulic hoses if necessary
4. Repair or replace any worn, damaged, or missing
parts.
5. Lubricate the loader as described 1. Lubricating the
loader on page 139.
6. Apply a coat of grease to all exposed cylinder rods
to prevent rust.
7. Repaint worn or scratched parts.
REMOVING THE LOADER STORING THE LOADER
To Next Page
