Kubota LA340 - Mower Lift Linkage System

1. How to use the 3-point hitch
When installing the backhoe, remove the 3-point hitch.
(1) Top link
(2) Clevis pin
(3)
Snap ring
(4) Lifting rod (left)
(5) Lower link
(6) Stopper pin
(7) Snap pin
(8) Check chain plate
(9) Top link pin
(10) Lynch pin
(11) Lifting rod (right)
Removing the 3-point hitch
1. Remove the lynch pin and the top link pin. Then remove the top link.
2.
Remove the snap ring and the clevis pin. Then remove the left and right lifting rod.
3. Remove the snap pin and the stopper pin. Then remove the check chain plate and lower links.
Installing the 3-point hitch
1. Follow the reverse of the procedure of “Removing the 3-point hitch”.
HITCH 3-POINT HITCH AND DRAWBAR
BX23S, LA340, BT603
83