11. When the third-function-kit is mounted, remove the
connector
. Connect the caps to the connectors of
mobile side and tractor side.
(1) Cap
(2) Connector
[A] Mobile side
[B] Tractor side
12. Unfasten
the
seat belt, turn the safety-lock-button
counterclockwise to unlock it, and then raise the
lever until it stops.
(1) Safety lock button (red) (2) Lever
13. Put the mobile part on the coupler stay (1). Put the
mobile part on the coupler stay (2) for cab model .
(1) Coupler stay (2) Coupler stay for cab model
REMOVING THE LOADER
To Next Page
