Control box
34
Quantron S
Machine use
Carry out the calibration test
The metering unit opening is set to determine the density
of seeds sown.
Carry out the calibration test:
• Before drilling
• If the seed quality is modified (humidity, dust,
impurities)
• When the seed variety is changed
- Move browser down to position yourself on the "Test
start" sub-menu.
- Press Enter key.
- Open the seed drill metering unit to the value
indicated.
- Position a container under the metering unit to collect
the seeds.
- Press Enter key.
Carry out regular calibration tests to check that
the seed drill is properly adjusted.
Carry out the calibration test with the
machine lowered, the power take-off
disengaged and the tractor stopped.
To Next Page
Loading...