Machine use
Control box
Quantron S
35
- Shortly rotate the metering unit in order to fill the cells.
- Press on the button Start/Stop.
- Empty the container and reinstall it underneath the
metering unit.
- Press Enter key.
- Press on the button Start/Stop.
- Rotate metering unit by at least 30 turns.
• After 30 metering unit rotations, a short sound alarm
will resound. This minimum quantity is required to
accept the calibration test.
The minimum quantity is reached. The seed flow can be
stopped.
The screen displays:
• Number of metering unit rotations
• Distribution cylinder rotation speed
• The number of metering unit rotations required
to simulate the application rate corresponding to
1/10 ha
- Press on the button Start/Stop.
- Press Enter key.
- weigh the seeds collected during the test.
- Input collected weight.
- Press Enter key.
On machine driven hydraulically or electrically,
the metering unit will automatically rotate by one
turn to fill the cells.
If necessary, the test can be stopped (e.g. to
empty the container before it overflows), and
resumed using Start/Stop key.
Wheat: Rotate metering unit by at least 50 turns.
Rape: Rotate metering unit by at least 100 turns.
To Next Page
Loading...