Control box
44
Quantron S
Functioning during work
Drilling in field corners
To maintain the seed quality in the corners, use the
premetering function.
- Press 2 times Start/Stop key.
The metering unit will run for 6 seconds in a premetering
function.
Move forward with the tractor while premetering is
running.
Momentary drilling stop
- Press button Start/Stop in the following situations:
• At the end of work
• Filling the hopper.
Using the manual mode
In the manual mode (MAN km/h), the premetering is
impossible. The programmed speed is the reference
speed.
- Press on the button Start/Stop.
Press Start/Stop button when seeding should
start again.
Respect the reference speed during work.
Otherwise over and underdosing will occur.
To Next Page
Loading...