Why is there 'No print output after reception' on my Kyocera All in One Printer?
If there's no print output after reception, check if memory forwarding is activated and verify the forwarding destination.
How to fix 'Cannot feed paper set cassette 1' on Kyocera ECOSYS FS-1135MFP Printer?
If your Kyocera Printer displays 'Cannot feed paper set cassette 1', and you have optional feeders installed, ensure that all paper feeders and the printer cassette above the selected one are properly closed.
What to do if my Kyocera All in One Printer displays 'Cannot receive document.'?
Check that the modular cord is correctly connected. If a communication error is displayed, resolve the error and ask the sender to resend the document. Also, make sure that RX (reception) restriction is not activated; if it is, cancel the RX restriction.
What to do if Kyocera ECOSYS FS-1135MFP says 'Memory is full. Print job cannot be processed completely.'?
Unable to continue the job as the memory is used up. Press the OK key to print the scanned pages. The print job cannot be processed completely. Press the Stop key to cancel the job.
What to do if Kyocera ECOSYS FS-1135MFP Printer says 'Load paper in cassette 1'?
If your Kyocera Printer displays 'Load paper in cassette 1', it means the indicated cassette is out of paper. Load paper into the cassette.
Why does my Kyocera All in One Printer say 'Cannot perform broadcast transmission.'?
This message indicates that there is not enough free space available in the memory. You need to free up space in the memory, or send the broadcast after the memory has free space.
Why Kyocera All in One Printer displays 'Cannot use polling reception.'?
If you cannot use polling reception, check with the recipient to ensure polling transmission is being used correctly on the sending machine.
What to do if my Kyocera Printer says paper jammed?
If a paper jam occurs in your Kyocera printer, the machine will stop, and the location of the jam will be indicated on the Message Display. Leave the machine on and follow the instruction to remove the jammed paper.
What to do if Kyocera ECOSYS FS-1135MFP ejects blank sheets?
If your Kyocera Printer is ejecting blank sheets, make sure the originals are loaded correctly. When using the platen, place originals face-down and aligned with the slit glass. When using the document processor, place originals face-up.
How to clean Kyocera ECOSYS FS-1135MFP Printer dirty printouts?
If your Kyocera Printer produces dirty printouts, the platen or document processor might be dirty. Clean the platen or the document processor to resolve this issue.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Standard Memory | 256 MB |
| Connectivity | USB 2.0, Ethernet |
| Scanner Type | Flatbed, ADF |
| Scan Resolution | 600 x 600 dpi |
| Copier Resolution | 600 x 600 dpi |
| Fax Capability | Yes |
| Fax Transmission Speed | 33.6 kbps |
| Maximum Paper Size | A4 |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Dimensions | 494 x 430 x 448 mm |
| Print Speed | 35 ppm |
| Standard Input Capacity | 250 sheets |
| Copy Speed | Up to 35 cpm |
| Maximum Input Capacity | 800 sheets (with optional paper feeders) |
To Next Page